All-sun 25MHz 100MSa/s Digital 2in1 Handheld Portable Oscilloscope+Multimeter Single Channel Waveform USB LCD Backlight
95.00$
All-sun 25MHz 100MSa/s Digital 2in1 Handheld Portable Oscilloscope+Multimeter Single Channel Waveform USB LCD Backlight EM125,free shipping with best price.
This handheld oscilloscope is a portable waveform measurement tool and fulfills basic electronic engineering requirements.
It is one of the best 2 in 1 test tools in outdoor testing or teaching.
The high speed AD sampler and CPU can convert the analog signal into digital signal and show on the 128X64 LCD backlight display.
The high speed comparator can get good edge trigger to present steadiness.
Its multimeter part uses a dedicated chip (6000-count), which can provide a higher precision.
The large capacity lithium battery can ensure 10 hours working after fully charged.
The plug meets American and European standards.
AUTO Key:
The oscilloscope will set the parameters to input signal in the most suitable way.
The multimeter measurement range will switch autom atically.
| Scopemeter Specification : | |
| Bandwidth (-3dB) | 25MHz |
| Sampling Rate | Max 100M Sa/s |
| Channel | 1 |
| Coupling | AC , DC |
| Rise Time | <17.5nS |
| Input Impedance | 1MΩ,<=20pF |
| Max Input Voltage | CAT II 300V |
| Vertical Resolution | 8bit |
| Vertical Sensitivity | 50mV / div -20V/div |
| Horizontal Resolution | 10nS/div |
| Horizontal Sensitivity | 10nS/div – 5S/div |
| Record Length | 0.1K/Channel |
| Trigger Mode | Auto , Rising edge , Falling edge |
| Screen | 128×64, with LED backlight |
| Battery | 3.7V lithium battery, about 1000mAH |
| Charger | Input Voltage : 100-240V ac , Output: DC5V+-10% , 1000mA |
| Size | 174 x 92 x 40 mm |
| Weight | 330g |
| Display | 6000counts |
| Input | Max Input Voltage: CAT II 600V |
| Continuity Test | In 600Ω range, beeps at<25Ω |
| Diode Test | |
| If voltage drop of the diode under test is more than 2V or | |
| if input terminals are open, the display will show ”OL”. | |
| If voltage drop is less than 0.25V, the built-in buzzer will sound. | |
| Capacitance | 6.000Nf-6Mf,7 ranges |
| Resistance | 600.0Ω-60.00MΩ,6 ranges |
| Voltage | 6V-600V,3 ranges |
| Vertical System: channel of scope: | |
| Bandwidth (-3Db) | 25MHz |
| Accuracy | 50Mv/div: ±3% of full scale |
| Vertical Offset Accuracy(DC) | ±0.2div±2mV±0.5% of offset |
| Trigger | DC to 20MHz:0.8div |
| Specification of probe: | |
| Rise Time | X1 23.3ns |
| X10 17.5ns | |
| Bandwidth | X1 DC to 15 MHz |
| X10 DC to 25 MHz | |
| Input Impedance | X1 1MΩ |
| X10 10MΩ(without scope’s input resistance 1 MΩ | |
| Input Capacitance | X1 46Pf(without scope’s input resistance 1 MΩ) |
| X10 about 15pF | |
| Multimeter Specification Accuracy Form:±(% of reading +digits) | |||
| Function | Range | Frequency,Test current,Or load voltage | Condition:at calibration temperature±5degree C,for 1 year |
| DC Voltage | 6.000V | ±(0.5%+8) | |
| 60.000V | ±(0.5%+8) | ||
| 600.000V | ±(0.5%+8) | ||
| AC Voltage | 6.000V-600.0V | 40Hz-400Hz | ±(1.0%+10) |
| 400Hz-2kHz | ±(5.0%+10) | ||
| Resistance | 600.0Ω | ±(1.0%+5) | |
| 6.000kΩ | ±(1.0%+5) | ||
| 60.00kΩ | ±(1.0%+5) | ||
| 600.00kΩ | ±(1.0%+5) | ||
| 6.000MΩ | ±(1.0%+5) | ||
| 60.00MΩ | ±(2.0%+5) | ||
| Capacitance | 6.000nF | ±(5.0%+8) | |
| 60.00 nF | ±(3.0%+8) | ||
| 600.0 nF | ±(3.0%+8) | ||
| 6000 nF | ±(3.0%+8) | ||
| 60.00uF | ±(3.0%+8) | ||
| 600.0uF | ±(5.0%+8) | ||
| 6.000 mF | ±(8.0%+8) | ||
| Diode | 2.000V | Test Current:2mA | Buzzer beeps if the voltage is less than 0.25V. |
| Buzzer beeps if the resistance is less than 25Ω. | |||
Package Includes:
1pc x Scopemeter
1pc x 20MH ( 10:1 ) Probe
1pc x Test lead
1pc x Charger
1pc x Built-in battery (1200 mAh)
1pc x User manual
1pc x Carrying bag
Avis
Il n’y a pas encore d’avis.