FIAT Bypass -Emergency Start Device Plug And Start FIAT Anti-theft cancel

Product Specifications
Manufacturer: Car Lab IMMO
Condition: New

FIAT Bypass – Emergency Start Device Plug And Start
FIAT Bypass – Emergency Start Device Emulator will only work vehicles equipped with metal key. It won’t work with a Smart Remote key
Emulator From Car Lab Immo with Product This Weight Product: 40g

The fastest procedure – car is ready to start right after plugging in
Intelligent recognition of the ECU and car
Original CarLabImmo tool – you can trust it won’t let you down

FIAT Bypass – Emergency Start Device Overview
To use Fiat Bypass you just need to connect it to the OBD2 socket in the car.
The tool bypasses the original immobiliser signal and allows you to start the car right after plugging it in.

FIAT Bypass – Emergency Start Device Usage
Requirements:
Car has to be equipped with mechanical key.
Car has to be equipped with original parts. The device will work only in case of a lost key.
If the car is equipped with an SGW Module (some models starting from 2017 year), you need to use SGW Adapter in order to bypass Security Gateway Module

How to use FIAT Bypass – Emergency Start Device:
Insert the device into OBD plug
(In some models produced from 2017 year, you have to use SGW Adapter)
– the LED will start blinking fast.
Turn the ignition ON – the LED will start blinking slowly.
Start the car.
If the LED keeps blinking fast after turning the ignition ON,
take the key out, wait 30 seconds and turn the ignition ON again.
Sometimes the procedure needs to be repeated again.

FIAT Bypass – Emergency Start Device Supported cars (Europe)

FIAT Bypass – Emergency Start Device Supported cars (South America)